High-Strength Steel – Q700D Plate
High-Strength Steel – Q700D Plate: A Q700D low-alloy, high-strength structural plate listed on Bisalloy Global for lighter load-bearing and transport structures. Published values are verified against the current official product page and the official BISALLOY product datasheet.
Inspect the steel plate
Enter dimensions, rotate the steel and calculate its approximate mass.
Drag to rotate · Arrow keys also work
Thickness: 3–12.75 mm
Theoretical calculation using nominal dimensions and an assumed density of 7,850 kg/m³. Tolerances and cuts affect delivery mass; not a stock confirmation or certified weighing. Calculation source ↗
Technical specifications
mm: 0 < Length ≤ 25000; 0 < Width ≤ 10000; 0 < Thickness ≤ 500. Plates: 1–1000.
Overview
High-Strength Steel – Q700D Plate: A Q700D low-alloy, high-strength structural plate listed on Bisalloy Global for lighter load-bearing and transport structures. Published values are verified against the current official product page and the official BISALLOY product datasheet.
Technical specifications
| Technical specifications | Mechanical properties | Source document |
|---|---|---|
| Thickness range | 3–12.75 mm | High-Strength Steel — Q700D Plate product datasheet · 2026-04 · 1 |
| Proof strength | ≥700 MPa | High-Strength Steel — Q700D Plate product datasheet · 2026-04 · 1 |
| Tensile strength | 770–940 MPa | High-Strength Steel — Q700D Plate product datasheet · 2026-04 · 1 |
| Mechanical properties | A ≥14%; 180° bend R = 1t; Charpy-L ≥47 J @ −20°C | High-Strength Steel — Q700D Plate product datasheet · 2026-04 · 1 |
| Chemical composition | C≤0.12%; Si≤0.40%; Mn≤2.00%; P≤0.025%; S≤0.010%; CEV≤0.49%; Pcm≤0.25% | High-Strength Steel — Q700D Plate product datasheet · 2026-04 · 1 |
Applications
- Transportation
- Construction
- General engineering & fabrication
Key advantages
Equivalent standards
Verified certificates
Verified certificates
Certificates will appear here after the relevant files and their scope have been verified.
Cutting, welding and bending notes
Cutting, welding and bending guidance is provided only where supported by official product documentation.
Datasheets and supporting documents
Request a quote
Provide product, thickness, quantity and application information for a qualified response.